FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Noctua NH-D14 Lower Noise Heatsink Review
Noctua NH-D14 Lower Noise Heatsink Review
  90%   
Abstract: Weighing in at 1240 grams, the 161mm tall, 140x156mm square Noctua NH-D14 processor heatsink is large no matter how you size it up. This heatsink currently ranks near the top of Frostytech's Top 5 Heatsinks chart, and since we're comparing it against nearly 280 heatsinks, that should tell you something.

 Manufacturer  Category  Published  Author 
Noctua   Cooling / Heatsinks   May 27, 2010   Max Page  

In this review Frostytech will be testing out Noctua's massive dual-fan NH-D14 heatsink and comparing it against 280 other heatsinks... just because we like you. Return the favour and spread the word about Frostytech!

As you probably know, Noctua is collaboration between the Austrian-based Rascom Computerdistribution Ges.m.b.H (Willkommen!) and Taiwanese manufacturer Kolink International Corp (Ni Hao!). The Noctua NH-D14 heatsink is sort of a special case as it comes bundled with two fans; Noctua's 120mm NF-P12 and 140mm NF-P14 models. Each vaneaxial fan features SSO bearings, vortex-control notches and techniques like textured leading impeller surfaces, all in an effort to reduce noise signature. Silent but deadly, as it were.

The big NH-D14 heatsink stands as tall as a modern tower heatsink but is twice as wide. The dual-fan set up more than makes up for that bulk by proving itself to be an excellent low noise solution capable of performance cooling. This heatsink currently ranks near the top of Frostytech's Top 5 Heatsinks chart, and since we're comparing it against nearly 280 heatsinks, that should tell you something.

Weighing in at 1240 grams, the 161mm tall, 140x156mm square Noctua NH-D14 processor heatsink is large no matter how you size it up. It's six, 6mm diameter copper heatpipes fan out from the base into two separate towers of nickel plated aluminum cooling fins. Both fans are held in place with easy to use wire fan clips that engage with small rubber mounting grommets. The fans rest against clear elastomer strips that provide the proper spacing from saw-toothed fin edges, and isolate the fans from creating possible vibration noises within the body of the heatsink.

Noctua NH-D14 Heatsink
heatsink specsheet
manufacturer: noctua
model no.: nh-d14
materials: nickel plated aluminum fins, copper heatpipes, copper/aluminum base.
fan mfg: (1) noctua nf-p12*, (1) np-p14

fan spec:
*900-1300rpm, 12v, 0.09a
900-1200rpm, 12v, 0.10a

fan dim:
*25x120x120mm
25x140x140mm

heatsink & fan dim: 161x140x156mm
weight: 1240 grams
includes: multi-socket mounting hardware, thermal compound, fan speed adaptors, fan clips, screwdriver, instructions


Compatible with Sockets:
AMD: 754/939/940/AM2/AM2+/AM3
Intel: LGA775/1156/1366

Est. Pricing: $90USD ($90CDN)

MOUNTING KIT UPGRADEABLE TO SUPPORT AMD SOCKET AM4?

Manufacturer Provided Mounting Kit Required to Support AMD Socket AM4 Motherboards? YES

Manufacturer AM4 Kit Request Form Link:
https://noctua.at/en/nm-am4-mounting-kit-order-form

Noctua state: "Owners of Noctua CPU coolers can obtain the Noctua NM-AM4 SecuFirm2 Mounting-Kit free of charge via this form. A proof of purchase (electronic version, photo or scan of the invoice) of both a Noctua CPU cooler and either a socket AM4 mainboard or socket AM4 CPU are required. There is a dedicated upgrade kit  (NM-AM4-UxS) available for NH-U14S, NH-U12S and NH-U9S"

For more details, heatsink exceptions and a complete list of incompatible coolers, see here.

Noctua NM-AM4 SecuFirm2 Mounting-Kit supported on following Noctua heatsinks Frostytech has tested: NH-C12PNH-C14NH-D14NH-D15 , NH-D9L, NH-L12, NH-L9x65, NH-U12 , NH-U12PNH-U9, NH-U9B . Noctua NM-AM4-UxS Mounting-Kit: NH-U14S, NH-U12S and NH-U9S.

The heatsink is compatible with Intel socket 775/1156/1366 and AMD socket AM2/AM3 processors, be they single, dual, quad or six, eight or deca-core chips. Noctua's NH-14 heatsink retails for about $94CDN ($90USD / £60GBP) online at QuietPC (UK), Newegg (US), and NCIX (Canada) . It is big, so be sure to measure the space above the CPU to ensure you have at least 165mm clearance.

To ensure good thermal conductivity between the different components, the copper heatpipes and aluminum fins of the NH-D14 heatsink are nickel plated, and all joints soldered. Soldering decrease thermal joint resistance between the fins and heatpipes, or heatpipes and base.

The heatsink is designed to works with 120mm sized fans, which are held in position with wire clips that lock into a notch running along the outside edges.

Fans are held in place with easy to use wire fan clips that engage with small rubber mounting grommets. The grommets keep the wire clips in position so it's much less of a hassle when re-installing a fan. Often the tab that holds the fan in place falls out on other heatsinks that use wire fan clips, so we really noticed this seemingly innocuous touch.

Installation Hardware

Noctua's NH-D14 heatsink is compatible with Intel socket 775/1156/1366 and AMD socket 754/939/940/AM2/AM3 processors. The CPU cooler ships with a variety of brackets, separated into several packages for AMD and Intel processors. For each CPU socket small metal tabs are attached to the heatsink base, a backplate positioned on the motherboard, then everything fixed in place with spring-tensioned screws.

The multi-language manual makes installation pretty straightforward. Both fans are pre-installed on the heatsink along with clear rubber anti-vibration strips across the edges of the thin aluminum fins. Fans may need to be removed for the installation procedure, but this is relatively painless as Noctua have designed the wire fan retention clips with hand holds, and best of all little rubber studs to keep the clips locked into the fan frame.

A small syringe of thermal compound is included, along with in-line resistors which can be added to reduce the speed of the NH-D14's fans. The blue fan speed resistor reduces fan speed the most, the black connector reduces fan speed about half way.

FrostyTech's Test Methodologies are outlined in detail here if you care to know what equipment is used, and the parameters under which the tests are conducted. Now let's move forward and take a closer look at this heatsink, its acoustic characteristics, and of course its performance in the thermal tests!

° Next Page 

Table of Contents:

 1: — Noctua NH-D14 Lower Noise Heatsink Review
 2:  360° View - Noctua NH-D14 Heatsink
 3:  Acoustic Sample and Heatsink Sound Levels
 4:  AMD Heatsink Temperature Comparisons
 5:  Intel Heatsink Temperature Comparisons

List all Noctua heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Arctic Liquid Freezer 120 CPU Watercooler Review

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review
...More Articles >>


Websites you may also like:
PCSTATS

FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2024 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.