FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Cooling Fundamentals: Ball Vs. Sleeve Bearings
Cooling Fundamentals: Ball Vs. Sleeve Bearings
  0%   
Abstract: What's the fuss over ball and sleeve bearings in todays cooling fans? Heck, what's even the difference? Read on and know more then anyone around you about these little, but important things.

 Manufacturer  Category  Published  Author 
FrostyTech   Cooling / Heatsinks   Apr 26, 2000   Max Page  

Home > Reviews > Page: Sleeve Bearings

The next most common bearing system used in computing peripherals is the sleeve bearing. These bearings are made from materials like bronze, beryllium copper and similarly hard metals that are typically pressed into porous forms by powder metallurgy. The bearings are generally thick cylinders impregnated with oil, with a highly toleranced internal shaft space. The oil is carried within the sleeve by interconnecting pores which can account for up to 35% of the volume.

 The sleeve bearing operates on the principle that the rod fitting within the shaft rests upon a very thin layer of lubricant as it rotates which is drawn up by capillary action. In an ideal situation the rod wouldn't make any contact with the sleeve and operate essentially silently. Without that thin layer of fluid between the rotating shaft and the sleeve, the bearing material will wear away from the friction.

In this image of a sleeve bearing (a. viewed from the top) we can see the effects of the lubricant on the rod as it rotates within the exaggerated internal space of the sleeve. While the image describes a sleeve bearing slightly different from those used in many computers, the important aspect is really the force diagram.

a) P denotes the force of the rod as it rotates within the sleeve (caused by an unbalanced fan blade for example). The oblong shape p denotes the reactive force applied to the rod by the lubricant as it is compressed into a thin-film barrier between the rod and the inner walls of the sleeve.

b) This diagram of the side simply illustrates how the lubricants reactive force is distributed along the length of the sleeve.

What does the mean? Well is illustrates the dependency upon adequate lubrication all sleeve bearings rely upon. Remove the lubricant and there is no barrier to prevent metal-to-metal contact as the rod rotates within the sleeve. Conversely, change the viscosity of the lubricant towards the viscous end, and the rotational speed of the rod is affected.

Known sleeve bearing problems.

When sleeve bearings fail, one of three things typically happens. Almost all failures will occur because of issues with the lubrication.

Failure one, worn bearing- This occurs when the lubrication is insufficient or the rotating component too unbalanced,. The rod begins to wear away the sleeve material to a point when the cylindrical space is no longer round. The rod will begin to vibrate producing an audible noise as it rotates. In instances such as this there is nothing that can be done, but to replace the bearing or more typically the entire fan.

Failure two, reduced fan speed - A situation can sometimes develop where the lubricant partially evaporates, or becomes more viscous then its operational tolerances will allow. It then resists the magnetic forces rotating the fan blades causing the entire assembly to rotate at a lower then normal RPM. The results of this type of soft failure can be serious if the fan is cooling an essential device like a power supply or CPU.

Failure three - Complete failure. Occurs when there is an absence of lubricant, or when highly viscous lubricant overcomes the rotational force from the fans' motor. In these cases the fan will not rotate at all, and devices which need cooling may overheat. This is one of the more common failures among power supply fans because of the continual amount of dust they suck in and their elevated operating temperatures. This type of failure can also occur when improper lubricants are used which become highly viscous through age or as a reaction to operational temperatures.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Cooling Fundamentals: Ball Vs. Sleeve Bearings
 2: — Sleeve Bearings
 3:  In the field issues
 4:  Conclusions

List all FrostyTech heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Arctic Liquid Freezer 120 CPU Watercooler Review

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review
...More Articles >>


Websites you may also like:
PCSTATS

FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2024 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.