FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Globalwin CAK38 Copper Heatsink
Globalwin CAK38 Copper Heatsink
  78%   
Abstract: Right now the Globalwin CAK38 is one of the top-tier copper socket A coolers available. It weighs in at 450g and comes with an almost unbeatable 6800 RPM Delta 60mm fan.

 Manufacturer  Category  Published  Author 
Globalwin   Cooling / Heatsinks   May 13, 2001   Max Page  

Home > Reviews > Page: Globalwin CAK38 Heatsink Perspectives
Globalwin CAK38 Heatsink Perspectives

The Fan:
The CAK38 uses a customary Globalwin fan, the seven-bladed 6800RPM Delta. The fans are advertised as double ball bearings, and produce a lot of noise (around 42dBa according to the stats). The Delta puts out 38CFM worth of air flow and comes with a standard wire-screen finger guard. Interestingly, the base of the fan sits 7mm above the tops of the fins.

Heatsink Top:
The CAK38 has 23 rows of fins, each segmented into roughly 8mm widths. With a constant 2mm spacing between each of the fins, airflow would seem to be conforming to the current standards. Fin thickness varies widely, and most of the fins show marks from the saw blads teeth. The clip is very tight to clip down.

Side A:
The entire heatsink sits in at 71mm in height with the fan guard in place, making it one of the taller heatsinks out there. The 25mm high Delta fan sits 7mm above the top of the copper fins, the space acting as a type of plenum. The copper fins are 30mm in height, and the base 5mm thick.

Side B:
The clip seems to have a nasty habit of getting stuck between the fan and the top of the copper fins every time the heat came out of the box. Each copper fin is cut into roughly 8mm widths. The bottom corners are rounded over slightly as well.

Heatsink Base:
With the markings more than evident from the machining on the base, the CAK38 has a brushed appearance. One corner of the base is notched out 11mm to accommodate the socket cam shaft.

Our tests with the straight edge on the base show that it is very slightly concave in shape. A good quality thermal pad, or space filling thermal compound is a necessity with this roughly finished base.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Globalwin CAK38 Copper Heatsink
 2: — Globalwin CAK38 Heatsink Perspectives
 3:  Looking a little bit closer
 4:  Final results and conclusions

List all Globalwin heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.