FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Ibuypower IBP-Z001 Liquid Cooling System Review
Ibuypower IBP-Z001 Liquid Cooling System Review
  86%   
Abstract: IbuyPower's IBP-Z001 self-contained liquid cooling system. The unit consists of a copper waterblock with integrated pump, a short length of 1/2-inch ID Norprene tubing and heat exchanger with 120mm PWM fan.

 Company link  Category  Published  Author 
IbuyPower   Cooling / Heatsinks   Dec 04, 2008   Max Page  
Home > Reviews > Page Title: 360° View - Ibuypower IBP-Z001 Heatsink

360° View - IbuyPower IBP-Z001 Watercooling System


Information on Frostytech's test methodology is available here.

The 120mm PWM fan on the Ibuypower IBP-Z001 heat exchanger spins at 2500RPM by default. The computer system BIOS can drop that down for quieter operation to 800RPM. A 4-pin PWM motherboard header provides power. The radiator uses 1/2" barbs and is keyed for a 120mm fan on one side, and to attach to the rear of a computer case through 120mm fan holes (screws are provided). The effective area of the heat exchanger is 105x105mm. Overall radiator dimensions are 147x120x35mm.

The waterblock/pump unit of the Ibuypower IBP-Z001 system can be placed about 4" away from the heat exchanger. The total length of the Norprene tubing is 230mm.

From the top you can see that Ibuypower's IBP-Z001 self-contained liquid cooling system is quite compact. Two 4-pin PWM power connectors are all that is required to run the system.

360° View - IbuyPower IBP-Z001 Watercooling System - Waterblock


Information on Frostytech's test methodology is available here.

No data is available on the integrated pump for the Ibuypower IBP-Z001 waterblock. A 4-pin PWM motherboard header provides power and allows the system to adjust speed. Generally speaking, it's wise to leave pump speed at the default setting and vary fan speed instead. The body of the pump/waterblock is made from glass fiber reinforced plastic (just a like a fan), and fully sealed. There are no visible means to open the waterblock for inspection or cleaning

Note the use of stainless steel crimp clamps around the Norprene tubing. The Norprene tubes have a total length of 230mm and are 1/2" ID, 5/8" OD. The tubing is very flexible and fairly kink resistant. You can get a good radius of bend in the tubes without much concern for the tubing kinking. The entire waterblock is less than 17mm thick, 45mm tall including the motor.

The copper base of the waterblock ships with a pre-applied patch of thermal paste. The effective copper area that mates with the processor is 43mm in diameter. The four screw holes around the outside of the copper with the metal thread inserts are for the CPU socket mounting hardware.

Base Finish and Flatness

Flipping a heatsink over to inspect the business end is often a simple indicator of overall cooler quality. More practically speaking, a heatsink is in many ways only as effective as the contact it makes with the processor - the flatter and smoother the better. Base finish is one of the criteria that Frostytech measure in the course of evaluating heatsinks, and it involves two distinct aspects. Surface Finish is the first; this is calculated with the aid of Surface Roughness Comparator that has a cross section of common machine surface finishes and their numerical surface roughness equivalents in microinches. The second is Surface Flatness. This is tested with an engineers straight edge, in two axis.

The copper waterblock on the Ibuypower IBP-Z001 system has a machined base with a surface roughness of approximately ~64 microinches. The manufacturer has purposefully given the surface a very fine ridged texture. The base is generally flat in both axis.



 Previous Page °
° Next Page 

Table of Contents:

 1:  Ibuypower IBP-Z001 Liquid Cooling System Review
 2: — 360° View - Ibuypower IBP-Z001 Heatsink
 3:  Acoustic Noise Measurements
 4:  AMD K8 Heatsink Temperature Comparisons
 5:  Intel LGA775 Final Heatsink Temperature Comparisons

List all IbuyPower heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 11:29AM, 11.23.2017
In Case You Missed it...
°  Scythe's Mugen 5 Rev. B

°  Noctua NH-L12S Low-Profile cooler

°  Corsair's ML120 Pro RGB fans pair

°  Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

°  Samsung to continue adopting heat pipes for smartphones in 2018

°  be quiet! Dark Base 700 Case Review




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.