FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Gigabyte 3DCooler-Pro PCU21-VG Heatsink Review
Gigabyte 3DCooler-Pro PCU21-VG Heatsink Review
  89%   
Abstract: The 3DCooler-Pro is an an all-in-one aluminum and copper heatsink designed to support all processors currently available.

 Manufacturer  Category  Published  Author 
Gigabyte   Cooling / Heatsinks   Mar 02, 2004   Max Page  

Home > Reviews > Page: Closer Examination of the Heatsink
Gigabyte 3DCooler-Pro Heatsink From All Angles
The Fan:
The blue squirrel cage fan is constructed of two 25mm tall sections placed together end to end. The top fan draws air in from the side which is visible in the picture to the left, and the opposite end draws air in under the aluminum fins. The fan works by exhausting that air out through the central cylinder of aluminum fins, to keep them cool. The translucent plastic cover protects the circuitry which controls fan speed, and also diffuses the bright blue LEDs soldered to the blue PCB. The Gigabyte 3DCooler-Pro connects with a standard molex pass through cable, and an additional 3-pin motherboard fan header supplies an RPM signal to the operating system/BIOS.

Heatsink Top: The fan is firmly attached inside of the aluminum finned section so it could not be removed. Under the clear plastic cap which comes off a little too easily, we find the PCB and circuitry which controls fan speed, and the blue LEDs. A fan speed controller attaches to the PCB here, and connects to a PCI bracket or aluminum FDD bay bracket which can be placed at the front or rear of the case depending on your preference.

Side A:
The entire 3Dcooler-pro heatsink stands about 92mm tall, making it pretty big compared to the last few heatsinks to cross our test bench. The forged copper base is about 6mm thick on average, and connected to the rest of the heatsink by four sections of 6mm diameter copper heatpipes (2 heatpipes bent into "U" shapes). The aluminum fin section measures 51mm tall by 83mm wide. Note the translucent plastic cap which protects the circuitry and diffuses the blue LED illumination when the heatsink is powered up.

Side B:
The 43 aluminum fins each measure 0.4mm thick, and are spaced approximately 0.8mm apart. The copper base is capped with a small section of stainless steel, and it is over this that the K7 and K8 clip mechanisms rest to hold the Gigabyte 3DCooler-Pro in place. The socket 478 clips rest on the small copper tabs visible in the picture to the left. Installing the heatsink isn't all that complicated since it is a tool free unit, but it is vital to make sure the heatsink is oriented properly for each particular socket and processor.

Heatsink Base:

The copper of the 3DCooler-Pro has been nicely machined from the granular casting, and measures 40x40mm. Being forged, the copper is a little more stiff than with a traditional punched sheet metal base, and takes milling nicely. The surface finish is very smooth, and surface flatness is excellent according to our straight edge. The 3DCooler-Pro even comes with a small syringe of thermal compound to make installation a breeze.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Gigabyte 3DCooler-Pro PCU21-VG Heatsink Review
 2: — Closer Examination of the Heatsink
 3:  Heatsink Thermal/Acoustic Test Parameters
 4:  Surface Roughness Comparison
 5:  Initial Temperature Test Results
 6:  Final AthlonXP and Pentium4 Test Results

List all Gigabyte heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.