FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Tocools Crown Prototype Heatsink Review
Tocools Crown Prototype Heatsink Review
  0%   
Abstract: So now that we have our Frosty little hands on this prototype cooler, what is so special about it?

 Company link  Category  Published  Author 
Tocools   Cooling / Heatsinks   Oct 01, 2002   Max Page  
Home > Reviews > Page Title: Close up look at the heatsink

Tocools Crown Heatsink From All Angles
The Fan:
Most 80mm fans we have seen in operation were YS Tech, but the Crown breaks the trend and uses a Delta. The 25mm thick fan draws 0.51A and benefits the user by being a bit quieter in operation than standard 60mm fans are typically. While this fan will connect via 3-pin cable to the fan header on the motherboard, I'd play it safe and hook it up to a y-splitter and Molex pass-thru.

Heatsink Top:
With 18 fins machined from a solid block of aluminum the thermal properties of the metal are going to be very uniform. Each fin measures 1mm thick, and is spaced 2mm apart from one another. At first glance the Tocools Crown employs a pretty standard cooling method. The real trick happens where the fins make contact with the base of the heatsink. Rather then just meeting the base plate at 90 degrees like all extruded heatsinks do, the base is angled up at the center, down to the edges. Essentially the base is shaped like an elongated triangle.

Side A:
The clip used on the Crown is primitive, and is in fact laser cut from a stainless steel sheet. I'd expect the production version to use a more advanced clipping system which is easier to maneuver (this one is rather difficult to use). The fan attaches to the heatsink by two small aluminum supports which are screwed into the side of the heatsink. Both fan and heatsink are 80mm wide.
Side B:
Unless you really look carefully you won't notice that the fins go right down to where the base should be, but isn't. This clever trick pushes exhaust air down and out to either side. The model we have here used some rather large screws to keep the 80mm fan in place. The heatsink itself is only 62mm wide in this direction, and 33m tall.
Heatsink Base:
This is a prototype cooler so there is a lot of machining marks evident. The base finish however, is very well done having been machined smooth and flat. Notice how the vertical fins come all the way through to the base of the heatsink making good used of downward exhaust air. The fins are spaced with about 2mm of distance between one another. The base area measures 52x50mm


 Previous Page °
° Next Page 

Table of Contents:

 1:  Tocools Crown Prototype Heatsink Review
 2: — Close up look at the heatsink
 3:  New Heatsink Test Parameters
 4:  Test Results - Acoustic Measurements / Thermal Results

List all Tocools heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 1:16PM, 11.24.2017
In Case You Missed it...
°  Scythe's Mugen 5 Rev. B

°  Noctua NH-L12S Low-Profile cooler

°  Corsair's ML120 Pro RGB fans pair

°  Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

°  Samsung to continue adopting heat pipes for smartphones in 2018

°  be quiet! Dark Base 700 Case Review




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.