SilentiumPC is a new thermal solutions brand out of Poland that focuses, in part, on economical heatsinks geared towards lower noise cooling. I know what you're thinking - the world doesn't need another heatsink - but it certainly could do with more affordable silent CPU coolers! Silent is good, as they say. In this review Frostytech will be testing out the SilentiumPC Fera2 HE1224 heatsink.
The Fera2 HE1224 is a 154mm tall CPU cooler
built around four 6mm diameter exposed copper heatpipes. The overall design is
not unlike Deepcool's Ice Wind Pro, so it will be interesting to see how
the two compare. The Fera2 HE1224 stands 154mm tall, is 123mm wide and 72mm deep. The relatively thin profile should allow it to fit with ease in most motherboards, with a minimum of interference from near by memory module or VRM motherboard heatsinks. The cooler weighs 555 grams and ships with a very quiet 120mm PWM fan that spins at 1400-600RPM, moving upwards of 55CFM according to manufacturer specs. The fan is attached with wire fan clips (a good sign). I've never been a fan (pun intended!) of those pull-type rubber fan posts,
they break far too easily. An extra set of wire fan clips are also included. Retailing for around $30 USD/CDN, the SilentiumPC Fera2
HE1224 heatsink is compatible with AMD socket 754/939/940/AM2/AM3/FM1/FM2 and
Intel LGA2011/1366/115x/775 processors.
Retailing for around $30 USD/CDN, the SilentiumPC Fera2 HE1224 heatsink is compatible with AMD socket 754/939/940/AM2/AM3/FM1/FM2 and Intel LGA2011/1366/115x/775 processors.
The leading and trailing edges of the aluminum fins have a small pattern to help break up airflow as it enters the fin stack.
Note how the heatpipes pass through the center line of the SilentiumPC Fera2 HE1224 heatsink; the four 6mm diameter heatpipes are swagged into the aluminum base block such that the center-most heat pipes land in the middle of the fin stack. The aluminum to copper joints are all swaged, solder is not used.
The stack of aluminum fins itself measures 105mm tall, 122.5mm wide and 46mm deep.
Heatsink Mounting Hardware
The SilentiumPC Fera2 HE1224 heatsink ships with a rear motherboard support frame for socket LGA2011/1366/115x/775 Intel motherboards and AMD socket 754/939/940/AM2/AM3/FM1/FM2 boards. This heatsink only weighs 555 grams, but the mounting screws firmly keep it in place.
As we mentioned, there is an extra set of fan brackets in the box. A small syringe of thermal compound is also supplied.
FrostyTech's Test Methodologies are outlined in detail here if you care to know what equipment is used, and the parameters under which the tests are conducted. Now let's move forward and take a closer look at this heatsink, its acoustic characteristics, and of course its performance in the thermal tests!
Find a Heatsink / RSS Feeds
. Latest Heatsink Reviews
. Top 5 Heatsinks Tested
. News RSS Feed
. Reviews RSS Feed
. Contact Us / Heatsink Submissions
. Submit News
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.