 |
the D-Link DFE-910 Network
|
|---|
| Thu Feb 01, 2001 | 2:42P| PermaLink |
|
|
:
"Now the hardware setup is quite a simple thing, just pop the side, or whatever comes off, your case and insert the card into any free PCI slot, making sure it is securely connected and screwed in at the bracket. You can then either choose to attach the WOL cable to your NIC and motherboard, if supported, or not. I don't ever use WOL myself, as walking 10 feet to the other room isn't all that much of an inconvenience. Plug the included UTP cable into the back of the NIC and into the Switch, on both computers. Then plug in the Switch, boot up your computers, and use the included floppy disk to install the drivers. The setup is really quite simple, as it should be for a kit, and I don't believe anyone will encounter much in the way of problems."
|
|
FULL STORY @
HWDAILY
(http://www.hwdaily.com/reviews/dlinkdfe/dlinkdfe.shtml)
|
|
|
