As I already told you earlier, the FSB speed can be controlled by the BIOS and also by DIP switches on the board. The core voltage, the clock generator and the DDR RAM voltage can only be adjusted by jumpers on the motherboard. The core voltage range lies between 1.075v and 1.850v, the clock generator voltage has to be selected between 3.30v and 3.56v and the DDR RAM voltage can be set from 2.7v (default) to 2.9v. I experienced that changing the clock generator voltage and the voltage that goes to the DDR RAM does not have any influence on our overclocking adventure!
FULL STORY @ OVERCLOCKERSONLINE (http://www.overclockersonline.com/index.php?page=articles&num=57)