 |
3R System Santafe Case Review
|
|---|
| Wed Feb 20, 2002 | 8:31P| PermaLink |
|
|
The 3.5” bay is attached to the chassis by 2 small screws, in addition to 4 hooks on the top which slide into their appropriate holes on the 5.25” cage. You can install up to four drives in this cage, or whatever your setup is. Note that three of the drives are installed inside the cage; the last drive, however, is installed upside down under the bottom side of the cage. The cage is neither tight nor wide so installing drives shouldn’t be a problem.
|
|
FULL STORY @
MIKHAILTECH
(http://www.mikhailtech.com/articles/cases/3rsantafe/)
|
|
|
