FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Thermaltake 1U DTFCF014-1 Heatsink Review
Thermaltake 1U DTFCF014-1 Heatsink Review
  68%   
Abstract: Everybody knows about Thermaltake, but most people don't know that this heatsink manufacturer also makes 1U heatsinks.

 Company link  Category  Published  Author 
Thermaltake   Cooling / Heatsinks   Mar 04, 2002   Max Page  


Thermaltake 1U DTFCF014-1 Heatsink Review


Everybody knows about Thermaltake, but most people don't know that this heatsink manufacturer also makes 1U heatsinks. Like a good desktop heatsinks, 1U heatsinks work best when they are designed to be super efficient, and use the best possible materials.

This particular cooler, the Thermaltake DTFCF014-1 (which we will be calling the 1U Extruded after its aluminum construction) is really only good for older 1U servers with processors producing less than 50W of heat.

Heatsink Specsheet:
  • Model: DTFCF014-1
  • Fan: Everflow 12V, 0.2A.
  • Fan Dim: 10x60x60mm
  • Heatsink Dim: 27x59x75mm
  • HS Material: Extruded Aluminum
  • Mfg by: Thermaltake.com
  • Cost: ~$20

Sold By: Thermaltake
Heatsink Audio Sample Included. Intended for use on Socket 370/A processors.

It's somewhat difficult to really say whether or not the Thermaltake 1U Extruded heatsink would be better or worse off without the fan. Considering that all 1U server cases will have some type of cooling fan to keep the hard drives and other IC's within spec, is the little 60mm fan really necessary?

After all, those little server cooling fans can produce a good steady flow of air, which the 1U heatsink here could take advantage of for cooling as long as the socket is orientated the right way. So the question that has been in the back of my mind is whether Themaltake would have been better off not cutting away part of the fins and leaving the fan out of the picture entirely.

It's a tough call, but if it were a passive heatsink, the orientation of the motherboard socket would be the be all and end of this heatsink. That's something to think about at least, but let's move forward and take a good close look at Thermaltake's DTCFCF014-1 1U heatsink.

Thermaltake DTCFCF014-1 Heatsink From All Angles
The Fan:
A very thin 10mm thick 60mm fan is used on the Thermaltake 1U Extruded. The fan only draws about 0.2A, so it produces a moderate amount of flow which need only penetrate 10mm of fin before the base is reached. The fan is connected to the motherboard via a 3-pin power connector with RPM monitoring.

Heatsink Top:
Recessed within the fins themselves, the fan does not add any height to the heatsink and keeps the mounting clip in place. To keep things very simple, the fan is simply mounted to the fins with a few screws. This distorts the fins, but shouldn't really impact the overall airflow characteristics to any large degree.

Side A:
With a height of 27mm, the Thermaltake 1U extruded heatsink is really low profile. The down side to a heatsink with fins only 19mm tall, is that surface area is limited. However, since 1U servers are only leave about 28mm distance between the top of the processor and the top of the case there isn't much one can do.The clip is easy to engage with a screwdriver.
Side B:
The fins are smooth, and 75mm long. Within the heatsink there are exactly 33 fins. Each fin is barely 0.5mm thick at the tip, and just slightly larger at the top. The fins are 20mm in height, and the base is about 7mm thick (pretty standard). Fin spacing sits at 1.0mm.
Heatsink Base:
The base finish on Thermaltake's 1U extruded is pretty smooth. Perhaps it has been sanded after it left the extrusion die, or perhaps not at the flatness is not 100 % in both directions. Most extruded heatsinks are very slightly concave across the width of the heatsink. A yellow thermal pad is pre-applied to the base to even things up for the processor core.

° Next Page 

Table of Contents:

 1: — Thermaltake 1U DTFCF014-1 Heatsink Review
 2:  Heatsink Test Apparatus - Acoustic, Thermal
 3:  Thermal Test Results, Acoustic Sample

List all Thermaltake heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 8:45PM, 11.23.2017
In Case You Missed it...
°  Scythe's Mugen 5 Rev. B

°  Noctua NH-L12S Low-Profile cooler

°  Corsair's ML120 Pro RGB fans pair

°  Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

°  Samsung to continue adopting heat pipes for smartphones in 2018

°  be quiet! Dark Base 700 Case Review




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.