FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

CPUfx Core Heatsink Review
CPUfx Core Heatsink Review
  81%   
Abstract: Right out of the box "The Core" just has to win the coolest-looking heatsink award.

 Manufacturer  Category  Published  Author 
CPUfx   Cooling / Heatsinks   May 28, 2001   Max Page  

Home > Reviews > Page: The Core Perspectives

The Core Perspectives

The Fan:
"The Core" uses a high-RPM Delta fan. Rotating at 6800RPM with dual ball bearing the fan generates a lot of noise. The fan itself measures 25mm in height, and 60mm in size. With these Delta fans it's always a good idea to have a fan grill installed (included with the heatsink). The Delta is powered directly from the motherboard and has a RPM sensor.

Heatsink Top:
There is a lot of machining which has gone into this one of a kind heatsink. The fan sits in a 4mm recessed socket and there is an additional 8mm of space below the fins. The hardware used to attach the fan is stainless steel so there will be no concerns with corrosion later on brought about by the differences in electronegativites of steel and aluminum. From edge to edge, each hole is separated by 1mm worth of material.

Side A:
Looking somewhat like a boiler cut open, the exhaust side of "The Core" is where most of the cooling takes place. From just touching the side of the heatsink, it seems that the heat doesn't really go much higher than the second set of holes from the bottom. The finish on the side of this heatsink is excellent, though it really doesn't need to be since it doesn't come in contact with anything requiring such a flat surface.

Side B:
There are a couple of problems with this clipping system which we will go over in a second. The clip is made from punched out stainless steel, as is the bolt and mounting nut. The spring is not stainless however. There is only about 1mm worth of material on the very bottom which could pose a problem it were to ever be dropped. The spring is a bit tough, but applies a good force down onto the core of the processor.

Heatsink Base:
The base of "The Core" is impeccably finished and quite flat. There is a small notch to accommodate the socket cam arm. On either side there are mounting holes for Socket A mother boards. The heatsinks ships with two sets of nylon screws which can be threaded through the four mounting support holes which surround the socket A.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  CPUfx Core Heatsink Review
 2: — The Core Perspectives
 3:  Socket mounting
 4:  FrostyTech Synthetic Temperature Test Platform:
 5:  Synthetic Test Results:

List all CPUfx heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.