FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Twin Turbo Heatsink Review
Twin Turbo Heatsink Review
  66%   
Abstract: Whenever I hear about the 'Overclockerz Store' I sometimes wonder if the OCZ fellows don't spend their entire day trying to make simple little heatsinks into daemons of cooling prowess.

 Manufacturer  Category  Published  Author 
OCZ Technology   Cooling / Heatsinks   Mar 17, 2001   Max Page  

Home > Reviews > Page: Taking a closer look at the Twin Turbo

One of these 25mm thick fans out to be enough for even the most die-hard cooling duty. OCZ strap on two of them. The fans are a moderate RPM so noise is minimal. The grills aren't really that necessary, but the positioning of the fan over top of the heatsink is. Rather then the fans' motor being directly above the hottest spot on the heatsink the two sets of fan blades take the spot. The purpose is to move more air down in to this region of the heatsink than would normally be pushed down in typical configurations.

The heatsink component of the twin turbo is a fairly generic extruded aluminum design, which while not originally designed for this configuration has been well adapted.

It has a 7mm thick aluminum base, and oddly 3.75mm deep fin cuts. Looking at the how the clip sits in the clip channel it would appear as though the extrusion has been over-cut by the manufacturer.

The fins have a slight taper to them and go from about 1.25mm to 0.75mm over 29mm for good heat flow.

The over-cutting we spoke of a few seconds ago is a bit more visible in this image. The tapered fins help allow air to move down along each of the fins more effectively.

The Twin Turbo uses a two-part pivoting clip that is easy to wrangle into position. More importantly it doesn't require a screwdriver to remove the heatsink.

We're generally very tough when it comes to the base of heatsink. After all this is the part which makes contact with the processor. The flatter it is the better (less thermal compound required, better surface-to-surface contact, etc.). Extrusions always seem to be among the worst at keeping the base flat, and the Twin Turbo fairs about average. The base is not perfectly flat, but the degree of curve is at subtle. Best to lap this brushed base for a few minutes before installing it on the processor.

The over cutting on the Twin Turbo is something we're a bit concerned with. The main reason for our concern sits with the ability of this heatsink to spread the heat energy from the processor across the entire base. With such deep cutting into the 7mm thick base at so many intervals the effective base thickness is halved. As such a 3.25mm thick base may not have the ability to absorb and disperse the heat energy from a T-bird core or FCPGA PIII in the same way as the original 7mm thick base may have.

It's a difficult point to evaluate since we don't have an another sample of the heatsink extrusion to test the point on, but it's a factor which may have hindered the Twin Turbo from performing even better than it did in our tests.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Twin Turbo Heatsink Review
 2: — Taking a closer look at the Twin Turbo
 3:  FrostyTech Synthetic Temperature Test Platform
 4:  The final word on this heatsink

List all OCZ Technology heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.