FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Tuniq Tower 120 Extreme Heatsink Review
Tuniq Tower 120 Extreme Heatsink Review
  98%   
Abstract: Tuniq's Tower 120 Extreme is an enthusiast grade heatsink that cools very well, pretty quietly. In fact I'll save you the suspense and tell you straight up that it tops Frostytech's Intel reference chart and that it's one of the Top 5 best-ever heatsinks tested.

 Company link  Category  Published  Author 
Tuniq   Cooling / Heatsinks   Jan 12, 2010   Max Page  


Tuniq's Tower 120 Extreme is an enthusiast grade heatsink that cools very well, pretty quietly. In fact I'll save you the suspense and tell you straight up that it tops Frostytech's Intel reference chart and that it's one of the Top 5 best-ever heatsinks tested on Frostytech's AMD reference chart to date. And that's not comparing the Tower 120 Extreme against five... or even ten recent heatsinks... Frostytech.com compares it to well over 250 different heatsinks!

What's the secret behind this Tuniq heatsink?Simple, a heck of a lot of cooling surface area (think: lots of fins), three 8mm diameter copper heatpipes and two 6mm diameter copper heatpipes. In short, this CPU cooler is made to conduct heat efficiently from the processor by way of five exposed heatpipes into a mass of aluminum cooling fins. Highly scalloped outside edges add a measure of uniqueness to the design, and a 1000-2000RPM 120mm fan at the center of it all provides the necessary airflow.

The 152mm tall Tuniq Tower 120 Extreme heatsink weighs in at about 775 grams and is compatible with Intel socket 775/1366 and AMD socket 939/940/AM2/AM3 processors. The claim to fame is of course its integrated 120mm fan which is not visible from the outside. When it's spinning at 1000RPM the heatsink is nearly silent, so provided your PC can accommodate the 131x112mm footprint of the Tower 120 Extreme heatsink, it will give any low noise heatsink a good run for the money.

Oddly though, Tuniq opted for a non-PWM on this heatsink. Instead, fan speed control is achieved by a hard wired PCI bracket fan speed controller.

Tuniq Tower 120 Extreme Heatsink
HEATSINK SPECSHEET
Manufacturer: Tuniq
Model No.: Tower 120 Extreme
Materials: dark nickel plated aluminum fins, copper heatpipes and aluminum base
Fan Mfg: AGA12025F12L
Fan Spec: 1000-2000RPM, 12V, 0.16A
Fan Dim: 25x120x120mm
Heatsink & Fan Dim: 152x131x112mm
Weight: 775 grams
Includes: multi-socket mounting hardware, fan speed controller, instructions.

Compatible with Sockets:
AMD - 939/930/AM2/AM2+/AM3
Intel - 775/1366
Est. Pricing: $65USD ($65CDN)

The 120mm internal fan is illuminated with a couple blue LEDs, and slides out of its space in between the sculpted aluminum fins easily enough for cleaning.

Link many current generation CPU heatsinks, the Tuniq Tower 120 Extreme relies on a collection of 6mm and 8mm diameter copper heatpipes to transfer heat from its CPU base block to the cooling fins. The heatsink makes use of the popular 'exposed heatpipe format,' so there is as little as possible thermal resistance between the heat generated by the CPU and the copper heatpipes that conduct it to the rest of the heatsink.

The bulk of the heatsink is elevated 47mm above the base, that's enough clearance to pass over capacitors or chipset heatsinks positioned close to the CPU socket. At the base of the Tower 120 Extreme is a small extruded aluminum heatsink. It's used to shed heat from the aluminum that supports the five copper heatpipes in place.

Installation Hardware

The Tower 120 Extreme is compatible with Intel socket 775/1366 and AMD socket 754/939/940/AM2/AM3 processors and ships with a pile of brackets, metal support plates and brass spring-tensioned thumbscrews to that end. The installation procedure is okay, but not the most straightforward Frostytech has come across, due mainly to the large footprint of the heatsink's boxy frame.

In all cases the motherboard requires a rear support plate to be added, and it is with this that mounting screws are held firmly in place. The heatsink overhangs the socket so much that tool access is not possible, so in each situation spring tensioned thumb screws are used to affix the Tower 120 Extreme in place and apply the correct mounting pressure. With large heatsinks this is most often the case, unfortunately.

A small tube of Tuniq TX-3 thermal compound and a PCI bracket fan speed controller are also supplied. Be sure to glace at the printed instructions before attempting to install the Tower 120 Extreme heatsink.

FrostyTech's Test Methodologies are outlined in detail here if you care to know what equipment is used, and the parameters under which the tests are conducted. Now let's move forward and take a closer look at this heatsink, its acoustic characteristics, and of course its performance in the thermal tests!


° Next Page 

Table of Contents:

 1: — Tuniq Tower 120 Extreme Heatsink Review
 2:  360° View - Tuniq Tower 120 Extreme Heatsink
 3:  Acoustic Comparisons and Base Surface Quality
 4:  AMD K8 Heatsink Temperature Comparisons
 5:  Intel LGA775 Final Heatsink Temperature Comparisons

List all Tuniq heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review

IBM Watson Analytics for Heatsink Test Data
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 6:28PM, 09.22.2017
In Case You Missed it...
°  Raijintek Thetis Window Chassis Review

°  Antec cooler H2O H1200 Pro

°  Confirmed : The Threadripper Is An EPYC CPU In Disguise!

°  Ryzen ITX Cooler Roundup @ LanOC Reviews

°  Keeping Intel Core X-Series CPUs Cool With Noctua Air Cooling

°  Noctua NH-U9 TR4-SP3: Keeping Threadripper Running Happy




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.