FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

SuperMicro 750 Server Case Review
SuperMicro 750 Server Case Review
  81%   
Abstract: This case is gigantic. It comes with several fans, has a unique CPU fan, fold out doors, and locking bezel. It also costs a pretty penny... How does it fair considering the price?

 Company link  Category  Published  Author 
SuperMicro   Cases   May 21, 2000   Max Page  
Home > Reviews > Page Title: Spaces and installing components

The case is essentially broken up into three regions. (1) motherboard (2) power supply and (3) drive bays. The motherboard, being the most important region has the most amount of space, measuring 13" x 17" x 8-1/4". The motherboard has about 3" of space overtop of the slot cards for maximum airflow. Airflow is the key in this region, which can become choked with cables. The power supply is portioned out a space measuring 9-3/4" x 10-3/4", with about 5-1/2' of space directly above it for an extra hard drive or two. The rest of the space is taken up by the drive bays, which have a inch or so of free space around them.

 

Access to the inside of the Supermicro 750 is controllable. How? by a small lock on the bottom of the front bezel. The lock can be actuated to prevent the bezels' removal. Without removing the bezel it is impossible to open either of the swing-out side panels.

With the bezel removed, three screws on each of the leading edges of the panels must be loosened. Only then will the panels be able to swing open. Depending on what kind of work needs to be done on the case, each of the panels can be removed altogether very easily. This system is a tool intensive one, but works well for server-class environments where daily case access is not an issue. I would have personally found it helpful to have some type of built-in notch or retaining clip to keep the doors shut however. As it stands, pressure must be applied to the doors to keep them closed, then the screws tightened to keep the panels in place. So, basically they have to be screwed in closed before the bezel can be attached.
There are no covers or locks to prevent access to the power/reset controls, or any of the drives. While one particular case we reviewed previously had restricted access capabilities for all power/reset/drives, in the end it turns out to be more of an inconvenience then a plus. That is unless the box is supposed to just sit in a room and never be touched. With that in mind, the Supermicro seems to be designed for consistent use, where access to CD-ROMs or power switches need not be restricted in any way. So it's sort of a friendly server case in a way :-)

The motherboard tray does not slide out the back of the case, so installation of the motherboard is done directly in the frame of the case. Little stand off clips are attached and then the board is dropped in and screwed on. From a system building perspective, if only one computer is being made this isn't so much of a problem. If multiple computers were being made for an office or lab, this configuration would become awkward quickly as the case is large and difficult to move around.

For those of you who need to know, the case ships with a Venus or Caveman type ATX 2.01 compliant I/O shield.

The designers of this case decided long ago to stay away from rails for the 5.25" bays. Thus every single device that goes into the bays needs four screws, and that means both side panels must be opened. Even though rails don't negate the necessity of opening the case up to attach cables, opening both sides of the case just adds extra work to the job. If a sys admin is doing this, it means their time is being wasted. So while the case appears to be designed on the outside for the by-the-feet user, the guts seem to be targeted towards the open-it-up-once server class. See a contradiction?



 Previous Page °
° Next Page 

Table of Contents:

 1:  SuperMicro 750 Server Case Review
 2:  Cooling and Fans
 3: — Spaces and installing components
 4:  Nuances and Conclusion

List all SuperMicro heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-L9x65 Low Profile Heatsink Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Scythe Fuma SCFM-1000 Heatsink

Scythe Ninja 4 SCNH-4000 Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 3:13PM, 09.21.2019
In Case You Missed it...
°  Thermalright Macho 120 Rev.B CPU Cooler Review

°  Corsair H100i RGB Platinum TR4 Follow Up Review

°  Swiftech H240 X3 AIO processor cooler

°  SilverStone Lucid LD03 Computer Case Review

°  Deepcool Gamer Storm Castle 240EX Review

°  ATS Design Services for Digi-Key Customers




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2019 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.