FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Akasa EVO 120 AK-920 Low Noise Heatsink Review
Akasa EVO 120 AK-920 Low Noise Heatsink Review
  88%   
Abstract: The new, 2007 model Akasa EVO 120 improves on these shortcomings with a stocky copper base, and three chunky 8mm diameter heatpipes.

 Company link  Category  Published  Author 
akasa   Cooling / Heatsinks   Jan 31, 2007   Max Page  


This is the second revision of the Akasa EVO 120 (AK-120) heatsink, the first model produced under this name utilized thinner diameter heatpipes and a slim copper base. The new, 2007 model Akasa EVO 120 improves on these shortcomings with a stocky copper base, and three chunky 8mm diameter heatpipes. The changes have been well worth it, allowing the Akasa EVO 120 to handle high heat loads from Intel Core 2 Duo/Quad and AMD Athlon64 processors with quiet ease.

The heatsink stands 153mm tall, and occupies a footprint of 103mm, though the cooling fin portion is just 60mm thick. The three heat pipes distribute heat over an array of aluminum cooling fins that mirror the 120mm fan used here. The cooling fins are short, and built to disperse heat energy as quickly as possible to the surrounding environment. A single 120mm fan blows air tangentially across the fins at a moderate pace, without generating much in the way of noise.

Despite its large volume, Akasa's EVO 120 heatsink isn't overly heavy, weighing perhaps 450-500 grams. The heatsinks ships with the 120mm fan and a fan speed controller which enables the user to really dial speed down if desired. A pile of brackets and mounting clips allow the Akasa EVO 120 heatsink to install onto socket 775 and socket 754/939/940/AM2 processors easily.

Akasa Evo120 Heatsink
HEATSINK SPECSHEET
Manufacturer: Akasa
Model No.: Evo120 / AK-920
Materials: Aluminum fins, copper heatpipes and copper base.
Fan Mfg: Paxpower KM121225LB
Fan Spec: 1000-2000RPM, 12V, 0.18A
Fan Dim: 25x120x120mm
Heatsink & Fan Dim: 153x125x103mm
Weight: ~450 grams est.
Includes: multisocket mounting hardware, fan speed controller, molex power cables, printed instructions.

Compatible with Sockets: 754/939/940/AM2 and 775
Est. Pricing: $54USD ($59CDN)

There are a couple different sets of mounting brackets included with the Akasa EVO 120 heatsink, one for AM2, 754/939/940 and 775 sockets in fact. The different brackets screw onto the copper base block, and this in turn is bolted down to the motherboard with any number of different screws and spring tensioned fasteners. The small instruction booklet included with the EVO 120 heatsink does a good job at demystifying the whole process.

The fan speed controller is mounted onto a blank PCI bracket, and where necessary a set up jumper cables are provided that transfer the fans' RPM signal to the motherboard. The fan can also just be plugged into any 3-pin motherboard fan header, depending on your preference. The accessory is standard enough, it just would have been nicer if the knob was knurled or patterned; the smooth surface is a little slippery.

The three large diameter heatpipes at the heart of the Akasa EVO 120 heatsink fulfill the important role of transferring heat from the copper base to aluminum cooling fins. This you already know, but do you really have a handle on how the heatpipes do this?

Heatpipes Explained

The system works like this; as heat energy from the processor reaches the two heatpipes - which are sealed off at both ends to contain a small amount of "working" fluid under a vacuum - a reaction begins to occur. The working fluid inside each heatpipe absorbs the latent heat from the copper plate below, causing the fluid to undergo a phase change into water vapour (ie. it converts to steam). In our daily lives, water boils at 100°C, but as pressure is decreased the temperature gradient required to make water convert to vapour also drops.

The small amount of working fluid inside each heatpipe quickly converts to vapour, as the temperature of the evaporator end (hot side) of tube increases. The liquid vapour inside the heatpipe is subsequently drawn to the cooler end of the heatpipe where it condenses. As the hot vapour cools back into a liquid, the heat energy that was previously stored is transferred to the metal, and then surrounding fins of the heatsink.

The condensed vapour, now working fluid once again, is drawn back towards the hot evaporator end of the tube by capillary action along an internal wick structure. As the liquid reaches the hot end once more, the entire process repeats itself. This is how heatpipes work, and how the Akasa EVO 120 heatsink is able to keep the processor under it running cool.

FrostyTech's new Test Methodology is outlined in detail here if you care to know what equipment is used, and the parameters under which the tests are conducted. Now let's move forward and take a closer look at the Akasa EVO 120 heatsink, its acoustic characteristics, and of course it performance in the thermal tests!


° Next Page 

Table of Contents:

 1: — Akasa EVO 120 AK-920 Low Noise Heatsink Review
 2:  360° View - Akasa EVO 120 heatsink
 3:  Acoustic Comparisons and Base Surface Quality
 4:  K8 AMD Heatsink Temperature Comparisons
 5:  Intel 775 Heatsink Temperature Comparisons

List all akasa heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 8:25PM, 12.15.2017
In Case You Missed it...
°  Noctua NH-U9, U12S, U14S TR4-SP3 Threadripper cooler

°  Arctic BioniX F120 and F140 fans review

°  be quiet! Dark Base Pro 900 Case Review

°  Cooling fan maker Power Logic scheduled for listing

°  Antec Mercury 120 Review

°  Zalman Z-Machine X7 Full Tower Case Review




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.