FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Verax Polargate AL S Pentium4 Heatsink Review
Verax Polargate AL S Pentium4 Heatsink Review
  0%   
Abstract: The Polargate Al S does take a few steps towards higher cooling performance which may interest some mainstream consumers.

 Manufacturer  Category  Published  Author 
Verax   Cooling / Heatsinks   Jul 11, 2004   Max Page  

Home > Reviews > Page: Examining the Heatsink
Verax Polargate AL S Heatsink From All Angles
The Fan:

The Polargate AL S contains two Verax CAIRdB fans which are each about 25mm thick. Compared to a traditional fan, the CAIRdB fans are pretty revolutionary - but it is important to keep in mind that this heatsink is really meant for zero noise systems. The fans use NIRO ball bearings and are temperature controlled to run at 1400-3200RPM (20C-40C). Each fan has two 3-pin connectors, the first for powering the fan, and the second for controlling its RPM with the aid of a small DIP switch.

Heatsink Top:
With the upper fan section of the Polargate AL S removed, you get a better feel for how this heatsink operates. Air is exhausted down into the aluminum fins from each of the CAIRdB fans, and the entire fan shroud is held in place with four vibration absorbing rubber posts. The fans do not come in direct contact with the metal of the heatsink, so any vibrations that do occur are most likely absorbed by the rubber. There are two steel pads for the socket clip to press down on when the heatsink is installed in the socket 478 retention frame.

Side A:
From the side, the Polargate AL S is a rather complex assembly of parts. The twin fans sit back to back, but are separated from one another by a clear plastic window, so exhaust air is not co-mingled. The fan assembly sits on the aluminum frame with a couple rubber posts, and at the bottom of the heatsink is hardware which keeps all the parts of the cooler together. Air enters in through the tops of the aluminum fins, and exits at the base to either side. The small 40mm wide aluminum block holds the fins together (much like Zalman's heatsinks), and a steel plate keeps the heatsink centered over the Pentium4 processor.

Side B:
As you can see here, the twin verax fans sit about half their circumference inside the aluminum fins of the Polargate Al S cooler. Air enters each fan perpendicular to the fan blades, though a 60mm side intake, only to be exhausted downwards parallel to the impeller. This is somewhat similar to a squirrel cage fan. Within the stacked aluminum fins is the base of the heatsink, which is shaped somewhat like a rounded out "m" made from aluminum. This internal prisim-like shape helps to direct airflow out to either side of the cooler, and is a tactic many heatsink manufacturers are using these days. The Polargate AL S stands about 110mm tall, so be sure there is sufficient room in your case. Each of the stacked aluminum fins measures 0.5mm thick, and are spaced 1.0mm apart. The aluminum section of the heatsink covers 65mm of the total height.

Heatsink Base:

The aluminum base comes covered in white thermal paste, and measures 40x83mm in size. The surface finish is nicely machined, and very flat. Because of the internal structure of the base within the fins, the warm exhaust air is directed out and away from the processor itself. Note the steel support strip on each side of the heatsink for the clips to lock onto. The Polargate AL S weighs 425 grams, so it should not pose much of a problem with regards to PCB warpage.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Verax Polargate AL S Pentium4 Heatsink Review
 2: — Examining the Heatsink
 3:  Heatsink Thermal/Acoustic Test Parameters
 4:  Surface Roughness Comparison
 5:  Final Heatsink Temperature Comparisons

List all Verax heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.