Heatsink Reviews and Analysis
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Tocools Novasonic-AlCu Heatsink Review
Tocools Novasonic-AlCu Heatsink Review
Abstract: Tocools have ingeniously created a triangular base within the heatsink by machining the individual fins from the raw aluminum to create a triangle of material down the center...

 Company link  Category  Published  Author 
Tocools   Cooling / Heatsinks   Dec 20, 2003   Max Page  
Home > Reviews > Page Title: Closer Examination of the Heatsink

Tocools Novasonic-AlCu Heatsink From All Angles
The Fan: The Delta fan used here is 80mm in size and protected by a fan grill. The fan draws 0.51A and rotates at around 4500RPM.The fan connects to the motherboard via a standard three-pin motherboard fan header. There is just 1.5mm of clearance below the fan, and above the square tips of the fins.

Heatsink Top:
With 23 fins machined from a solid block of aluminum, the heatsink has less surface area than a traditional heatsink would typically. Each fin measures 1mm thick, and is spaced 2mm apart from one another. The interesting part of this heatsink lies below the metal clip of course....

Side A:
The clip Tocools use is sufficient, but not the easiest to use seeing as you will need a screwdriver to engage or release it. The clip is recessed into the body of the heatsink because it is wider than the Socket A platform. From this angle you can see the steps in the outer fins we mentioned previously. At the center of the heatsink the base is 20mm thick. At the outer edges it tapers down to just 1mm thick. The triangular copper insert measures 15mm tall at the center, with a base 44mm across.

Side B:
The side profile of the Novasonic-AlCu shows off a series of three crosscuts in the side of all the fins. A set of spring clips are used to hold the fan in place on top of the heatsink.

Heatsink Base:

An area of the base has been cut away 2mm to allow clearance for the socket A cam arm. The base of the heatsink is very nicely machined, though there are some very slim gaps visible around the outer edges of the copper which may indicate that the solder has not flowed completely between the two surfaces. The base finish is smooth and very flat.

 Previous Page °
° Next Page 

Table of Contents:

 1:  Tocools Novasonic-AlCu Heatsink Review
 2: — Closer Examination of the Heatsink
 3:  Heatsink Thermal/Acoustic Test Parameters
 4:  Surface Roughness Comparison
 5:  Final Temperature Results

List all Tocools heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>

Websites you may also like:

Google Search Frostytech

Time stamped: 5:58AM, 09.25.2018
In Case You Missed it...
°  Noctua Chromax Accessories Review

°  Cryorig C7 Cu @ LanOC Reviews

°  Arctic Accelero Twin Turbo III GPU Cooler Review

°  Corsair Crystal 280X RGB

°  Deepcool Gamer Storm Castle 240RGB Review

°  CPU Cooler Roundup 2018
Since June 1999

Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed

Social Media
Pinterest Info
Contact Us / Heatsink Submissions
Submit News
Suite 66
© Copyright 1999-2018 All Rights Reserved. Privacy policy and Terms of Use
Images © and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.