FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Zalman ZM80-HP VGA Heatpipe Cooler Review
Zalman ZM80-HP VGA Heatpipe Cooler Review
  85%   
Abstract: The Zalman ZM80-HP was one of the first two coolers to be introduced.

 Company link  Category  Published  Author 
Zalman   Cooling / Heatsinks   Mar 09, 2003   Max Page  
Home > Reviews > Page Title: How does the heatpipe work?

Cut in half, we can see the wick which lines the inside of the ZM80-HP heat pipe. The wick draws the working fluid by capillary action back to the evaporator end of the heatpipe.

The Zalman ZM80-HP system works this way; as heat energy is absorbed from the GPU by the front heatsink - through direct contact via the mounting base, and through the heatpipe as well - passive cooling begins. However, because of computer case airflow characteristics, the front heatsink on the videocard is not necessarily guaranteed good parasitic airflow.

When the videocard is installed in the AGP slot, the front heatsink is typically going to be upside down and sandwiched between another PCI card with little hope of sufficient airflow alone.

Convection cooling will of course kick in as that heatsink warms up, but to ensure the GPU doesn't overheat we need a little extra surface area. That extra bit of cooling comes in the form of an equally sized rear-mounted extruded heatsink. The key is now how to move the heat from the videocard processor all the way around to the back where the second large passive heatsink is mounted.

The internal wick is simply a section of hollow braided copper in this instance. When we cut the tube there was a little bit of water spray on the workbench, and the wick was wet to the touch.

The solution is naturally to use a heatpipe, and Zalman have opted for one measuring 300mm in length with a 5mm diameter.

As heat energy from the processor reaches the heatpipe at the front of the videocard, a reaction inside the copper tube begins to occur. The copper tube is sealed at both ends, but there is a small amount of liquid contained inside, in a vacuum.

The water (or working fluid) absorbs the latent heat which causes it to boil and undergo a phase change to water vapour. In our daily lives, water boils at 100C, but as pressure is decreased the temperature gradient required also drops. In any case, the small amount of water inside easily converts to water vapour as the temperature of the evaporator end of the heatpipe increases.

The vapour is subsequently drawn to the cooler end of the heatpipe and condenses. As the hot vapour cools back into liquid, the heat energy that it previously stored is transferred into the rear heatsink. The condensed vapour, now working fluid once again, is drawn back to the hot evaporator end of the heatpipe by capillary action along the internal wick structure. As the liquid reaches the hot end once more, the entire process repeats.

Heatpipes are a closed loop process which work within certain temperature ranges (for example 40C - 80C degrees). If the differential between the hot and cooler sides becomes too low (say for example, each side reaches 85 degrees) the system can stall. That shouldn't be a problem here however.

Before we check out the temperature results of the ZM80-HP, let's go through the steps necessary to install it properly. We've outlined the process pretty extensively here as it can be a bit complex if you don't read the manual fully.



 Previous Page °
° Next Page 

Table of Contents:

 1:  Zalman ZM80-HP VGA Heatpipe Cooler Review
 2: — How does the heatpipe work?
 3:  Installation Step: 1
 4:  Installation Step: 2
 5:  Installation Step: 3
 6:  Installation Step: 4
 7:  Installation Step: 5
 8:  Installation Step: 6
 9:  Installation Step: 7
 10:  Videocard Thermal Results

List all Zalman heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 4:27AM, 11.25.2017
In Case You Missed it...
°  Reeven & ThinkComputers Holiday Giveaway

°  Scythe's Mugen 5 Rev. B

°  Noctua NH-L12S Low-Profile cooler

°  Corsair's ML120 Pro RGB fans pair

°  Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

°  Samsung to continue adopting heat pipes for smartphones in 2018




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.