Fatty Case Mods
Case mods are one of the best ways to
personalize that big hunk of white plastic and sheet steel
that sits comfortably by your feet. What better way to modify the Fatty Case then by drilling it full of big, and I mean big holes. With all those tiny vents it was practically asking for it anyway.
The goal with this case
mod was to install an intake fan on the front bezel, a blowhole on the back, and
a large intake fan directly above the slot cards (to cool a toasty video card).
All the fans run on 120V, yup that's right 120V. Nothing like bringing a power
cord to your computer, and the case. Anyway the first thing
we did was go to the local hardware store and pickup a small assortment of hole
saws. Sawing through sheet metal and plastic with a hand saw or Dremel is fine
for small things but gets a bit tiring for larger, or multiple holes.
 |
The Fatty Case (modded)
- (1) 120mm 120V intake fan
- (1) 60mm 12v intake fan
- (1) 60mm 120v exhaust fan
- power supply for case
- two fan control switches
- Lots - O - power!
|
0%
