FrostyTech.com Heatsink Reviews and Analysis
> GO < Search
TOP 5 BEST Heat Sinks     SEARCH     News     Reviews    
Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
° Reviews and Articles
° Breaking News
° Mfg's Index
° Top 5 Heatsinks
° Top 5 Liquid Cooling
° Top 5 Low Profile   Heatsinks

Top 5 Heatsink Charts


NoFan Computer
What's New in Heatsinks?
°  Antec KÜHLER H2O 1250 Liquid CPU Cooler

°  Thermalright Neuheiten März

°  Cooling module makers to further reduce mobile device heat pipe thickness

°  CRYORIG C1: Compact High-End CPU Cooler for ITX- and Micro-ATX Systems

°  Noctua NH-D15 CPU Cooler Review

°  Cooler Master Blizzard T2 CPU Cooler Review


   - or - Best 5 Heatsinks?
Silverstone Argon AR01 Heatsink Review
Silverstone Argon AR01 Heatsink Review
Overall Rating:   80%
Abstract: Silverstone's Argon AR08 is constructed around three beefy 8mm diameter copper heatpipes which are exposed at the base of the cooler. Putting the heatpipes in direct contact with the top of the processor makes for a very thermally efficient path with a minimum of thermal joint resistance.

 Company link     Category     Published     Author    
Silverstone   $$ Price It! ££ Cooling / Heatsinks   Sep 26, 2013   Max Page  


The Silverstone Argon AR01 heatsink is a great example of one very popular cooler design that has been re-spun by a great many heatsink brands. The Argon AR01 performs quite well, it's just that this must be the sixth or seventh time Frostytech has reviewed essentially the same heatsink... so... it's a good thing we're throwing the new 200W Frostytech Mrk.III Intel LGA2011 test platform thermal test platform into the mix today!

Will the Argon AR01 heatsink melt in the face of a 200W heat load or bust into flames!? No, nothing quite that dramatic, but these thermal test results are certainly interesting for performance users and overclocking enthusiasts.

On with the heatsink review!

Silverstone's Argon AR01 is constructed around three beefy 8mm diameter copper heatpipes which are exposed at the base of the cooler. Putting the heatpipes in direct contact with the top of the processor makes for a very thermally efficient path with a minimum of thermal joint resistance. In short, this is a very good tower heatsink design and about the only shortcoming it has are those dinky white rubber fan mounts - more on that later.

Silverstone Argon AR01 Heatsink
HEATSINK SPECSHEET
Manufacturer: Silverstone
Model No.: Argon AR01 (SST-AR01)
Materials: Aluminum fins, copper heatpipes, aluminum base with exposed heatpipes.
Fan Mfg: Silverstone AS1225H12
Fan Spec: 1000-2200RPM, 12V, 0.23
Fan Dim: 25x120x120mm
Heatsink & Fan Dim: 159x124x77mm
Weight: 420 grams
Includes: multi-socket mounting hardware, thermal compound, instructions

Compatible with Sockets:
AMD - AM2/AM3/FM1/FM2
Intel - 2011/1155/1156/1366/775
Est. Pricing: $34USD ($34CDN)

The Argon AR01 ships with a single 120mm PWM fan that operates at 2200-1000RPM. Rubber vibration fan mounts are used to attach the fan to the heatsink fins directly; extra mounts are supplied for installing a second low-RPM fan (not included) to the rear of the cooler. The fan pushes about 37-81CFM at upwards of 53 dBA, according to our real world sound measurements.

Standing 159mm tall and weigh in at 420 grams, the Silverstone Argon AR01 heatsink is compatible ith Intel socket LGA2011/1366/1151/1155/1156/775 processors and AMD socket AM2/AM3/FM1/FM2 chips. Retail price is pegged at a competitive $34USD .

The Fan and Fan Mounts

The fan supplied with the Argon AR01 is moderately audible at full speed and whisper quiet when dialed back to its minimum RPM. The white rubber fan mounts are intended to reduce errant noises. We've seen many different styles of fan to heatsink mounting brackets in our time, these ones are supposed to be a bit easier to install than the typical rubber mount, with less chance of tearing.

The fan mounts pull through the blue fan frame like you'd expect, but instead of sliding down a slot stamped into the aluminum fins, or threading through the edge of the fins, the fan mounts wrap around the edge of the heatsink and press into a channel formed in the aluminum.

It's a new approach I'll give them that... but not one that instills a whole lot of "confidence." We'd rather see wire fan brackets used... never had a problem with that kind of fan mount.

A modest effort to break up laminar air flow over the thin aluminum fins is made by these 'tire tracks' embossed into each cooling fin.

Heatsink Installation Hardware:

Silverstone's Argon AR01 heatsink is compatible with Intel socket LGA1151/1155/1156/1366/2011/775 CPUs and AMD socket AM2/AM3/FM1/FM2 processors.

The heatsink ships with a rear motherboard metal support plate, an assortment of metal mounting brackets and the necessary threaded stand-offs and thumbscrews to make it all work. Once installed the heatsink is very firmly held in position and CPU swaps are straightforward.

Both Intel and AMD mounting brackets make use of a common C-channel bar which applies clamping force to the base of the heatsink. The design could be improved by adding a fulcrum or spring tensioned collar screws to equalize uneven clamping forces.

FrostyTech's Test Methodologies are outlined in detail here if you care to know what equipment is used and the parameters under which the tests are conducted. Now let's move forward and take a closer look at this heatsink, its acoustic characteristics, and of course its thermal performance on three different test platforms!

° Next Page 

Article Contents:
 Page 1:  — Silverstone Argon AR01 Heatsink Review
 Page 2:  360° View - Silverstone Argon AR01
 Page 3:  Heatsink Sound Level Comparison
 Page 4:  AMD Heatsink Temperature Comparisons
 Page 5:  Intel LGA115x Heatsink Temperature Comparisons
 Page 6:  Intel LGA2011 Heatsink Temperature Comparisons

Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

nPowerTek NPH-1366-140HC Heatsink Review

Dynatron G666 2U Xeon Server Heatsink Review

Dynatron G556 2U Xeon Server Heatsink Review

Dynatron G555 2U Xeon Server Heatsink Review

Dynatron G199 1U Xeon Server Heatsink Review

Cooler Master Nepton 280L Liquid Cooling System Review
...More Articles >>

 

Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 9:09PM, 04.24.2014



FrostyTech.com
Since June 1999

Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook Fan Page
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal

Contact the Suite 66 Advertising Agency
© Copyright 1999-2014 www.frostytech.com. All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.