FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Cooler Master HHC-001 Copper Heatpipe Heatsink
Cooler Master HHC-001 Copper Heatpipe Heatsink
  79%   
Abstract: Using cooper is an obvious first step, and Cooler master have even gone one step further by including twin heatpipes in the HHC-001.

 Manufacturer  Category  Published  Author 
CoolerMaster   Cooling / Heatsinks   Jun 12, 2002   Max Page  
Coolermaster HHC-001 Copper Heatpipe Heatsink

The list of emails requesting us to review the HHC-001 is pretty astounding, so here, finally is our review of this very cool, and very nifty looking heatsink from Coolermaster. With this heatsink we can say for certain that Aluminum is out and copper is in. Big noisy fans are in, and so are really quiet ones... manufacturers have been struggling to find new ways of improving the heat dissipating properties of their heatsinks as always.

Using cooper is an obvious first step, and Coolermaster have even gone one step further by including twin heatpipes in the HHC-001. The Heatpipes are there to try and boost the overall performance of the heatsink by bringing more heat to the upper area of the fins then simple heat flow can muster. It also makes this heatsink look damn fine I might add.

Do the heatpipes really make that much of a difference? Does the HHC-001 really deserve all the acclaim is has received in the past several months? Rest assured we are about to find out!

Heatsink Specsheet:
  • Model: HHC-001
  • HS Material: Copper, heatpipes, aluminum
  • Fan: 6800RPM, 12V, 36CFM,
  • Fan Dim: 25x60x60mm
  • FHS Dimensions: 80x60x75mm
  • Made by: Coolermaster
  • Cost: ~$40USD
Sold By: www.coolermaster.com.hk
Heatsink Audio Sample Included.

There have been countless explanations of what heatpipes are, how they work, and how effective they can be. I'm going to take the brief route and give you the non-scientific gist in one or two sentences because I know you have a long list of heatsink reviews to go through on FrostyTech today!

The basic operation of a heatpipe:

The two copper tubes which jump out of the Coolermaster HHC-001 and then swing around back in are hollow and encapsulate a vacuum. Around the inside of the copper tubes is sintered copper which acts like a wick for a small amount of working fluid (usually water) which is also contained in the tubes. When one end of the heatpipe gets hot, say from a nice little processor, that small amount of water vaporizes in the vacuum atmostphere inside the copper tubes. As the vapor makes its way to the other end of the copper tube it cools down and begins to condense. With no place to go but back, the condensed water vapour travels along the wick structure (coating the inside of the tube remember) back to the heat source where the entire process is repeated again, and again.

There are much more technical ways of describing this, but that's the gist of it. In any case the HHC-001 uses two heatpipes achieve even heat distribution at the tops of the copper fins where the heatpipes pass under the main flow of the fans exhaust.

Now with such a large mass of copper on top of those fragile AMD processor cores (for instance) it can be pretty important to minimize the amount of movement the heatsink can have if the computer is shifted, or moved roughly. One of the smallest things which we have seen a lot of heatsink manufactures overlook is sliding. When the heatsink is installed on a computer it can side a few millimeters down unless the clip also locks in place. As you can see by the photo below, Coolermaster have added an ingenious little cantilever at the center of the copper heatsink to lock that stainless steel clip in place, preventing the HHC-001 from any large movements once it has been installed on a processor.

Up next we are going to take a good look at the many different sides of the HHC-001 - its always hard to get a good look at heatsinks when you are shopping online, so enjoy the fact we've snapped a whole bunch of close up shots with the ol' digital camera.

° Next Page 

Table of Contents:

 1: — Cooler Master HHC-001 Copper Heatpipe Heatsink
 2:  Close up look at the heatsink
 3:  New Heatsink Test Parameters
 4:  Acoustic Test Results
 5:  Synthetic Temperature Test Results

List all CoolerMaster heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.