Evercool ND19715CA Copper-Core Heatsink Review
Apr 29, 2003 - Frosty No.1384 Category: Cooling / Heatsinks
While the ND19715CA isn't a true silent heatsink since it
measures in at over 40dB, it does manage to operate will low-to-moderate noise levels.
|
Eumax B605-01 Copper Heatsink Review
Apr 29, 2003 - Frosty No.1382 Category: Cooling / Heatsinks
The Eumax B605-01 is a full copper heatsink which has received a nice
nickel plating for that shiny, "I'm gonna get you sucka!" look.
|
|
Cooler Master XDream HSCV83 Copper Heatsink Review
Apr 29, 2003 - Frosty No.1383 Category: Cooling / Heatsinks
Most of us would really prefer to have the 24x7 computer generate about as much noise as a calculator, ie. nothing. Meet the Cooler Master XDream
|
Vantec GSW-6015 Heatsink Review
Apr 26, 2003 - Frosty No.1380 Category: Cooling / Heatsinks
By means of the edge tabs, this heatsink can
also be used on socket 478 processors, assuming you have one of the wire-clip HSRMs on hand.
|
|
Frostytech: Melamine Foam Sound Proofing for the Computer Case
Apr 24, 2003 - Frosty No.982 Category: Cases
After hunting around for a manufacturer which offered some kind of sound proofing product for computers the only one I could find was...
|
Dynatron DC1206BMY Copper Pentium4 Heatsink Review
Apr 20, 2003 - Frosty No.1375 Category: Cooling / Heatsinks
The significance of skiving is that there is no interface to be concerned with between the fins and base like solder.
|
|
Dynatron DC1U-B02 1U Copper Heatsink Review
Apr 20, 2003 - Frosty No.1376 Category: Cooling / Heatsinks
As there is generally no more than about 30mm of height for the entire cooling package, fans will obviously take up precious real estate. For Socket 478 Intel processors.
|
Dynatron DC1U-B01 1U Copper Heatsink Review
Apr 17, 2003 - Frosty No.1377 Category: Cooling / Heatsinks
Has Dynatron figured out the
secret to making the worlds best 1U socket A heatsink, or are we looking
at something which just makes the grade?
|
|
Vantec CCK-7015 1U Copper P4/Xeon Heatsink Review
Apr 17, 2003 - Frosty No.1372 Category: Cooling / Heatsinks
The flexibility of this
heatsink comes from the fact that with the right mounting plate it can
be used on either a 1U Intel Pentium 4 or Xeon socket 603/4 processor.
|
Dynatron DC1207BMX Copper Pentium4 Heatsink Review
Apr 17, 2003 - Frosty No.1371 Category: Cooling / Heatsinks
The significance of this set up is that there is
no thermal interface to be concerned with between the fins and baseplate.
|
|
Spire FridgeRock 5U213C1H3G Heatsink Review
Apr 17, 2003 - Frosty No.1370 Category: Cooling / Heatsinks
The FridgeRock's fan comes with a
thermistor attached by the outside leads which monitors case temperature, and adjusts RPM to suit.
|
JMC 400124 Phoenix 60 Radial Fin P4 Heatsink
Apr 10, 2003 - Frosty No.1367 Category: Cooling / Heatsinks
Based on similar techniques which were used by Agilent Technologies for their Arcticooler heatsinks a while
back, the JMC 400124 Phoenix 60 even carries the same logo.
|
|
Spire 9T236B1M3G Pentium4 Heatsink Review
Apr 03, 2003 - Frosty No.1363 Category: Cooling / Heatsinks
Who remembers the time when big loud fans were being slapped onto undersized heatsinks and being sold to consumers hungry for some overclocking?
|
JMC 400074 Skyjet 70 Radial Fin Heatsink Review
Mar 31, 2003 - Frosty No.1360 Category: Cooling / Heatsinks
From our standpoint the visual similarities between
this radial heatsink and the obs of long ago are pretty superficial.
|
|
Zalman CNPS7000-Cu P4 / Athlon64 Heatsink Review
Mar 31, 2003 - Frosty No.1359 Category: Cooling / Heatsinks
When used, the Fanmate 1 drops the speed of the integrated 92mm
fan impeller from 2400RPM to about 1350RPM making it barely audible.
|
JMC 401100 Phoenix 70 Radial Fin Heatsink Review
Mar 24, 2003 - Frosty No.1355 Category: Cooling / Heatsinks
The original Agilent heatsink
was made for socket 370 Pentium III processors, but this version is intended for use with socket 478 Pentium 4's.
|
|
Coolink U1L2 Heatsink Review
Mar 10, 2003 - Frosty No.1347 Category: Cooling / Heatsinks
In an effort
to improve the standard issue socket heatsink, Coolink have done something
a little different.
|
Coolink U1P2 Heatsink Review
Mar 10, 2003 - Frosty No.1346 Category: Cooling / Heatsinks
Sitting above the heatsink are two 25mm thick 5000RPM fans. If Coolink have the equation right, the U1P2 should be an interesting heatsink to test out.
|
|
Zalman ZM80-HP VGA Heatpipe Cooler Review
Mar 09, 2003 - Frosty No.1345 Category: Cooling / Heatsinks
The Zalman ZM80-HP was
one of the first two coolers to be introduced.
|
Zalman ZM50-HP VGA Heatpipe Cooler Review
Feb 12, 2003 - Frosty No.1338 Category: Cooling / Heatsinks
The ZM50-HP cooler has a slightly less complex appearance than its larger brother, but
is based upon the same principles and construction methods.
|
|
Taisol CGK760172A Copper Base Heatsink Review
Feb 05, 2003 - Frosty No.1335 Category: Cooling / Heatsinks
Cold forging is a process by
which metal is shaped within a closed die with continuous pressure, or
impact.
|
Eumax EU01 Copper Heatsink Review
Feb 05, 2003 - Frosty No.1334 Category: Cooling / Heatsinks
As the Eumax EU01 is composed of two separate sets of components - a copper base and many thin copper fins - the thermal interface between these two components is very important.
|
|
Coolsonic CS1672A Copper Skive Heatsink Review
Feb 05, 2003 - Frosty No.1333 Category: Cooling / Heatsinks
It's hard not to be a little impressed each time a TMD fan spins up creating
its distinctive whirling sound.
|
Coolsonic CS1662K Copper Skive Heatsink Review
Feb 05, 2003 - Frosty No.1332 Category: Cooling / Heatsinks
Skive technology for those who are unfamiliar with the term is based on a few
principles which make it exceptionally good for heatsinks.
|
|
Thermal Integration TI-T707TN Heatsink Review
Jan 29, 2003 - Frosty No.1329 Category: Cooling / Heatsinks
Stick a nice big cylinder of copper into the center of a radial fin heatsink and you have one very unique Pentium 4 cooler.
|
CPUmate DIA-10500 Heatpipe P4 Heatsink Review
Jan 28, 2003 - Frosty No.1325 Category: Cooling / Heatsinks
As a new company in a highly competitive market which is often "cut throat," innovation is the only way to survive, and thrive.
|
|
Taisol CCP445172 Copper Pentium 4 Heatsink Review
Jan 28, 2003 - Frosty No.1327 Category: Cooling / Heatsinks
he one-piece folded copper fin is folded and
soldered to the thick copper base.
|
Eumax DW-45 Copper Pentium 4 Heatsink Review
Jan 27, 2003 - Frosty No.1326 Category: Cooling / Heatsinks
However, just like adding a super fast fan to an everyday heatsink to improve cooling performance, making that same heatsink out of just copper is another
shortcut.
|
|