Taisol CMK702151A Copper Heatpipe Heatsink Review
Jun 29, 2003 - Frosty No.1351
Category: Cooling / Heatsinks
The tri-heatpipe and suspended base heatsink we see here from Taisol is one of the more unique concepts to come out of Taiwan of late.
|
Spire 5F271B1L3 Copper Core Heatsink Review
Jun 27, 2003 - Frosty No.1419
Category: Cooling / Heatsinks
If done properly, the copper will ultimately increase the surface area of the heat source enticing quicker transmission to the outer fins more effectively.
|
|
Vantec Spectrum UV LED Case Fans Review
Jun 23, 2003 - Frosty No.1416
Category: Cooling / Heatsinks
Vantec's adaptation of that
idea is certainly a lot cleaner and less expensive route to take - and no cold
cathode is required.
|
Evercool NW9F715CA Pentium 4 Heatsink Review
Jun 22, 2003 - Frosty No.1415
Category: Cooling / Heatsinks
The heatsink breaks with tradition and features an extruded aluminum
heatsink with soldered-in copper base insert.
|
|
CPUMate DAA-11500 Copper Heatsink Review
Jun 22, 2003 - Frosty No.1414
Category: Cooling / Heatsinks
Starting from the outset the CPUmate DAA11500 has all the necessary ingredients to make it an ideal socket A cooler.
|
Foxconn Generic Socket A Heatsink Review
Jun 21, 2003 - Frosty No.1423
Category: Cooling / Heatsinks
This isn't the best way of adding a copper heatspreader to an all aluminum extrusion heatsink, but it is one of the least expensive and simple ways to go about achieving that feature.
|
|
Spire BFA07B2 Copper Core Heatsink Review
Jun 20, 2003 - Frosty No.1422
Category: Cooling / Heatsinks
Based on an older design which did not feature a copper insert, the BFA07B2 can almost be considered a second generation heatsink.
|
CoolJag JVC661A V-Type Pentium 4 Heatsink Review
Jun 13, 2003 - Frosty No.1406
Category: Cooling / Heatsinks
Aluminum extrusions have typically been the most popular option, but within the last year and a half skiving has come to market and been adopted widely.
|
|
OCZ Gladiator II Copper Skive Heatsink Review
Jun 01, 2003 - Frosty No.1398
Category: Cooling / Heatsinks
In any case, the Gladiator II is made by the latter and sold
by the former for a pretty inexpensive price all things
considered.
|
Thermalright SLK-900U Copper Heatsink Review
May 28, 2003 - Frosty No.1396
Category: Cooling / Heatsinks
Given these two different sizes of fans, rotational
speeds, and CFM output it will be interesting to see just how the
Thermalright SLK900U reacts thermally!
|
|
Cooljag JVC258A V-Type Copper Base Heatsink Review
May 02, 2003 - Frosty No.1385
Category: Cooling / Heatsinks
Not only does the upwards expansion out
allow the heatsink to come equipped with a larger fan, but it also helps induce efficient exhaust judging by the looks of it.
|
Evercool ND19715CA Copper-Core Heatsink Review
Apr 29, 2003 - Frosty No.1384
Category: Cooling / Heatsinks
While the ND19715CA isn't a true silent heatsink since it
measures in at over 40dB, it does manage to operate will low-to-moderate noise levels.
|
|
Eumax B605-01 Copper Heatsink Review
Apr 29, 2003 - Frosty No.1382
Category: Cooling / Heatsinks
The Eumax B605-01 is a full copper heatsink which has received a nice
nickel plating for that shiny, "I'm gonna get you sucka!" look.
|
Cooler Master XDream HSCV83 Copper Heatsink Review
Apr 29, 2003 - Frosty No.1383
Category: Cooling / Heatsinks
Most of us would really prefer to have the 24x7 computer generate about as much noise as a calculator, ie. nothing. Meet the Cooler Master XDream
|
|
Vantec GSW-6015 Heatsink Review
Apr 26, 2003 - Frosty No.1380
Category: Cooling / Heatsinks
By means of the edge tabs, this heatsink can
also be used on socket 478 processors, assuming you have one of the wire-clip HSRMs on hand.
|
Frostytech: Melamine Foam Sound Proofing for the Computer Case
Apr 24, 2003 - Frosty No.982
Category: Cases
After hunting around for a manufacturer which offered some kind of sound proofing product for computers the only one I could find was...
|
|
Dynatron DC1206BMY Copper Pentium4 Heatsink Review
Apr 20, 2003 - Frosty No.1375
Category: Cooling / Heatsinks
The significance of skiving is that there is no interface to be concerned with between the fins and base like solder.
|
Dynatron DC1U-B02 1U Copper Heatsink Review
Apr 20, 2003 - Frosty No.1376
Category: Cooling / Heatsinks
As there is generally no more than about 30mm of height for the entire cooling package, fans will obviously take up precious real estate. For Socket 478 Intel processors.
|
|
Dynatron DC1U-B01 1U Copper Heatsink Review
Apr 17, 2003 - Frosty No.1377
Category: Cooling / Heatsinks
Has Dynatron figured out the
secret to making the worlds best 1U socket A heatsink, or are we looking
at something which just makes the grade?
|
Vantec CCK-7015 1U Copper P4/Xeon Heatsink Review
Apr 17, 2003 - Frosty No.1372
Category: Cooling / Heatsinks
The flexibility of this
heatsink comes from the fact that with the right mounting plate it can
be used on either a 1U Intel Pentium 4 or Xeon socket 603/4 processor.
|
|
Dynatron DC1207BMX Copper Pentium4 Heatsink Review
Apr 17, 2003 - Frosty No.1371
Category: Cooling / Heatsinks
The significance of this set up is that there is
no thermal interface to be concerned with between the fins and baseplate.
|
Spire FridgeRock 5U213C1H3G Heatsink Review
Apr 17, 2003 - Frosty No.1370
Category: Cooling / Heatsinks
The FridgeRock's fan comes with a
thermistor attached by the outside leads which monitors case temperature, and adjusts RPM to suit.
|
|
JMC 400124 Phoenix 60 Radial Fin P4 Heatsink
Apr 10, 2003 - Frosty No.1367
Category: Cooling / Heatsinks
Based on similar techniques which were used by Agilent Technologies for their Arcticooler heatsinks a while
back, the JMC 400124 Phoenix 60 even carries the same logo.
|
Spire 9T236B1M3G Pentium4 Heatsink Review
Apr 03, 2003 - Frosty No.1363
Category: Cooling / Heatsinks
Who remembers the time when big loud fans were being slapped onto undersized heatsinks and being sold to consumers hungry for some overclocking?
|
|
JMC 400074 Skyjet 70 Radial Fin Heatsink Review
Mar 31, 2003 - Frosty No.1360
Category: Cooling / Heatsinks
From our standpoint the visual similarities between
this radial heatsink and the obs of long ago are pretty superficial.
|
Zalman CNPS7000-Cu P4 / Athlon64 Heatsink Review
Mar 31, 2003 - Frosty No.1359
Category: Cooling / Heatsinks
When used, the Fanmate 1 drops the speed of the integrated 92mm
fan impeller from 2400RPM to about 1350RPM making it barely audible.
|
|
JMC 401100 Phoenix 70 Radial Fin Heatsink Review
Mar 24, 2003 - Frosty No.1355
Category: Cooling / Heatsinks
The original Agilent heatsink
was made for socket 370 Pentium III processors, but this version is intended for use with socket 478 Pentium 4's.
|
Coolink U1L2 Heatsink Review
Mar 10, 2003 - Frosty No.1347
Category: Cooling / Heatsinks
In an effort
to improve the standard issue socket heatsink, Coolink have done something
a little different.
|
|
